150W PU Round Belt Welding Machine Set, Polyurethane Belt Welder Set 150-350 ℃ Adjustable Temperature Electric Soldering Iron

Description PU round belt welding machine is a device that maintains a constant temperature by heating to a certain temperature. This device is easy to use and easy to operate, very stable effect is good, bonding belt forming effect fast, the belt will not break. not hot, easy to use. Fit for PU V-belt, PU Pentagonal belt, PU round belt, PU tube, Plastic strips and other products can be easily melted. The temperature of the equipment is usually between 150 degrees and 350 degrees. Parameter: Voltage:AC 110V/50Hz Power:150W Temperature range: 150°C-350°C How to use the adapter: The belt to be connected is fixed in the groove (usually V, O-groove) below the aluminum fixture (the clamp main refers to the gasket and nut). Specifically, remove the nuts on both sides of the nut and nuts (depending on the diameter of the belt, if the belt can be inserted directly into the groove, do not remove the nut and gasket), the belt into the groove, the gasket and Nuts re-fixed in the groove above the sides of the plywood in a parallel state, the spacing is about 2cm or so is appropriate (can be placed in the middle of the thermostat heater) Tips: PU round with a small diameter of the polyurethane belt, please put the round belt on the top of the tank there, so that the round belt 2 connector alignment, then the larger diameter of the round belt or red polyurethane ribbons please put the bottom The inside of the groove! Will be heated to the constant temperature heater (the best temperature of the belt connection at 160-180 degrees), the fixed belt heating (the premise of the heat belt can not be bubbles, otherwise affect the connection effect), and then docking, the fixture Manual clamp nut tightened to the belt docking firm; 3, Re-processing.Belt docking to complete, to be completely cooled after the removal of the belt scraping, leveling.

• Quality Material: The connecting pliers is made of High Quality Aluminium Alloy, Durable and Strong, Light weight and can provide a good grip. Scissors that can adjust the cutting angle, cutting smoothly, saving effort and convenient.
• Welding Material: PU round belt, triangle belt, pentagonal belt, PU tube, plastic strip and other products that are easy to melt can be used. The temperature of the electric iron must be within 250 ℃ when connecting, otherwise it will affect the physical properties of the polyurethane.
• Temperature Adjustment knob: 0-300℃ temperature is accurately adjustable, and the temperature is controlled within 250℃ during use, which can achieve a good connection effect.
• Working Principle: Polyurethane industrial belt bonder is a device that maintains a constant temperature by heating to a certain temperature. This equipment is easy to use, works well, the bonded belt is formed quickly, and the belt will not break.
• How to Use: PU round belt polyurethane round belt diameter is small, please put the round belt in the top slot, make the round belt 2 joints align, connect the round belt with larger diameter or the red polyurethane triangle belt, please put it below Inside the groove!